Info tool

[anon222]

This is a small info tool I've made. It displays some Hardware and System info.

Code:

#! /bin/bash
#--------------------------------------------------------------------------------------------------------
# Info tool by Misko_2083
#--------------------------------------------------------------------------------------------------------

#inxi installed?
if [ -z "$(which inxi)"  ]; then

    if zenity --title="Question" --question text="Inxi is not installed, do you want to install it?\nIf you choose No program will exit."
    then
        gksudo "sudo apt-get install inxi -y" | zenity --progress --title="Installing inxi" --text="please wait" --pulsate --auto-close
                if [ "${PIPESTATUS[0]}" -ne "0" ]; then
                    zenity --error --title="Error" --text="inxi could not be installed."
                    exit
                fi
    else
        exit
    fi
fi

disk_df=(FALSE "Fs disk space info" "df -Th | grep /dev/sd" "View filesystem disk space usage")

FDISK=(FALSE "List Partitions" "sudo fdisk -l" "List out the partition information (password required)")

BLOCKDEV=(FALSE "Display Block Devices" "lsblk" "List out information all block devices")

lspci_info=(FALSE "PCI info" "lspci -vnn" "View PCI devices info")

lspci_graph=(FALSE "Graphics" "lspci -vnn | grep VGA -A 12" "View graphics devices info")

lsusb_info=(FALSE "USB info" "lsusb" "View usb devices info")

CPU=(FALSE "32/64 bit CPU" " " "Find out is this 32 or 64 bit CPU")

CPUZ=(FALSE "Processor info" "lscpu" "Display detailed info on CPU")

OS=(FALSE "32/64 bit OS" "uname -a" "Find out is this 32 or 64 bit OS")

inxi_full=(FALSE "Full info" "inxi -Fxz" "View system info")

inxi_df=(FALSE "Partition info" "inxi -plu" "View partition info")

REPOS=(FALSE "View Repositories" "inxi -r" "View repositories on this sistem")

GRAPHICS=(FALSE "View Graphics" "inxi -Gxx" "View graphics on this sistem")

AUDIO=(FALSE "View Audio" "inxi -A" "View audio on this sistem")

NETWORK=(FALSE "View Network" "inxi -nz" "View network on this sistem")

NETWORKC=(FALSE "Network Configuration" "ifconfig -a" "View network  configuration on this sistem")

OPENGL=(FALSE "View OpenGL configuration" "glxinfo | grep OpenGL" "View OpenGL configuration on this sistem")

LSB=(FALSE "View lsb release" "lsb_release -dic" "View lsb release info")

ic="/usr/share/icons/zenity-llcc.png"
selection=$(zenity --window-icon="$ic" --list --radiolist --width=900 --height=700 --column="Select" --column="Name" --column="Command" \
--column="Description" --text="Select the info tool you wish to use, then click the Display button." --title="Info" --ok-label="Display" --cancel-label="Quit" --separator="\n" \
"${disk_df[@]}" \
"${FDISK[@]}" \
"${BLOCKDEV[@]}" \
"${lspci_info[@]}" \
"${lspci_graph[@]}" \
"${lsusb_info[@]}" \
"${CPU[@]}" \
"${CPUZ[@]}" \
"${OS[@]}" \
"${inxi_full[@]}" \
"${inxi_df[@]}" \
"${REPOS[@]}" \
"${GRAPHICS[@]}" \
"${AUDIO[@]}" \
"${NETWORK[@]}" \
"${NETWORKC[@]}" \
"${OPENGL[@]}" \
"${LSB[@]}" )

# If Quit is clicked then exit
if [ "${PIPESTATUS[0]}" -ne "0" ]; then
exit 0
fi

# check if anything is selected
echo $selection | grep '[a-zA-Z0-9]'
if [ "${PIPESTATUS[1]}" -ne "0" ]; then
zenity --info --title='Info' --text='Nothing was selected.'
exit 0
fi

echo $selection | grep "^Fs disk space info" > /dev/null
if [ $? = 0 ];then
    SOME_TEXT="df - View file system disk space usage\nYou can select the mount to open in the file manager"
    SOME_TITLE="df"

    df -h -T| tail -n+2 | while read fs type size used rest target; do
        if [[ $rest ]] ; then
            echo "$fs" "$type" "$size"B "$used"B "$rest"B "${target[@]}" |  grep /dev/sd | # remove "grep /dev/sd |" to show all
            awk '{print $1,"\n",$2,"\n",$3,"\n",$4,"\n",$5,"\n",$6}BEGIN{ s = 7; e = 35; }{for (i=s; i<=e; i++) printf("%s%s", $(i), i<e ? OFS : "\n"); }' #Workaround for disk labels that contain whitespaces(number of characters that can be divided by whitespace =e-s)
        fi
    done | sed -e 's/[ \t]*$//' $1|zenity --list --width=685 --height=350 --title="${SOME_TITLE}" --text="${SOME_TEXT}" --column="Device" --column="Type" --column="Size" --column="Used" --column="Free" --column="%Used" --column="Mount" --print-column="7"| cut -d '|' -f2| tee /tmp/tempdf

    #With radiolist is also an option
    #done | sed -e 's/[ \t]*$//' $1| sed 's!^/dev/sd*!FALSE\n/dev/sd!g' | zenity --list --radiolist --width=685 --height=350 --title="${SOME_TITLE}" --text="${SOME_TEXT}" --column="Select" --column="FS" --column="Type" --column="Size" --column="Used" --column="Free" --column="%Used" --column="Mount" --print-column="8"| cut -d '|' -f2| tee /tmp/tempdf


    if [ -z "$(cat /tmp/tempdf)" ]; then
    exit 0
    fi

    xdg-open "$(cat /tmp/tempdf)"
    rm -f /tmp/tempdf
fi

echo $selection | grep "List Partitions" > /dev/null
if [ $? = 0 ];then
    gksudo --message 'To run this tool your password is required. Enter your password, or press Cancel.' 'sudo fdisk -l' |tee /tmp/lsblkinfo.txt| zenity --title="PCI info" --text-info --width=800 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[2]}" -ne "1" ]; then
         leafpad /tmp/lsblkinfo.txt; rm /tmp/lsblkinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "Display Block Devices" > /dev/null
if [ $? = 0 ];then
    lsblk | zenity --title="PCI info" --text-info --width=800 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        lsblk > /tmp/lsblkinfo.txt; leafpad /tmp/lsblkinfo.txt; rm /tmp/lsblkinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "PCI info" > /dev/null
if [ $? = 0 ];then
    lspci -vnn | zenity --title="PCI info" --text-info --width=800 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        lspci -nn > /tmp/lspciinfo.txt; leafpad /tmp/lspciinfo.txt; rm /tmp/lspciinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "^Graphics$" > /dev/null
if [ $? = 0 ];then
    lspci -vnn | grep VGA -A 12 | zenity --title="Graphics" --text-info --width=800 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[2]}" -ne "1" ]; then
        lspci -vnn | grep VGA -A 12  > /tmp/lspcigraph.txt; leafpad /tmp/lspcigraph.txt; rm /tmp/lspcigraph.txt
    else
        exit 0
    fi
fi

echo $selection | grep "USB info" > /dev/null
if [ $? = 0 ];then
    lsusb | zenity --title="USB info" --text-info --width=800 --height=400 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        lsusb > /tmp/lsusbinfo.txt; leafpad /tmp/lsusbinfo.txt; rm /tmp/lsusbinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "32/64 bit CPU" > /dev/null
if [ $? = 0 ];then
    if [ "$(egrep -c ' lm ' /proc/cpuinfo)" -lt "1" ]; then
        bus_zen="32"
    else
        bus_zen="64"
    fi
        zenity --title="32/64 bit CPU" --info --text="This is $bus_zen bit CPU"
fi


echo $selection | grep "Processor info" > /dev/null
if [ $? = 0 ];then
    lscpu | zenity --title="Processor info" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        lscpu > /tmp/processorinfo.txt; leafpad /tmp//tmp/processorinfo.txt; rm /tmp/processorinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "32/64 bit OS" > /dev/null
if [ $? = 0 ];then
    if [ "$(uname -a | egrep -c 'i386|i486|i586|i686')" -eq "1" ]; then
        os_zen="32"
    else
        os_zen="64"
    fi
        zenity --title="32/64 bit OS" --info --text="This is $os_zen bit OS"
fi

echo $selection | grep "Full info" > /dev/null
if [ $? = 0 ];then
    inxi -Fxz -c 0 | zenity --title="Full info" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        inxi -Fxz -c 0 > /tmp/inxifull.txt; leafpad /tmp/inxifull.txt; rm /tmp/inxifull.txt
    else
        exit 0
    fi
fi

echo $selection | grep "Partition info" > /dev/null
if [ $? = 0 ];then
    inxi -plu -c 0 | zenity --title="Partition info" --text-info --width=650 --height=400 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        inxi -plu -c 0 > /tmp/partitionsinfo.txt; leafpad /tmp/partitionsinfo.txt; rm /tmp/partitionsinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "View Repositories" > /dev/null
if [ $? = 0 ];then
    inxi -r -c 0| zenity --title="Repositories" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        inxi -r -c 0 > /tmp/repositorieslist.txt; leafpad /tmp/repositorieslist.txt; rm /tmp/repositorieslist.txt
    else
        exit 0
    fi    
fi

echo $selection | grep "View Graphics" > /dev/null
if [ $? = 0 ];then
    inxi -Gxx -c 0| zenity --title="Graphics info" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        inxi -Gxx -c 0 > /tmp/graphicsinfo.txt; leafpad /tmp/graphicsinfo.txt; rm /tmp/graphicsinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "View Audio" > /dev/null
if [ $? = 0 ];then
    inxi -A -c 0| zenity --title="Audio info" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        inxi -A -c 0 > /tmp/audioinfo.txt; leafpad /tmp/audioinfo.txt; rm /tmp/audioinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "^View Network$" > /dev/null
if [ $? = 0 ];then
    inxi -nz -c 0 | zenity --title="Network info" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        inxi -nz -c 0 > /tmp/networkinfo.txt; leafpad /tmp/networkinfo.txt; rm /tmp/networkinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "Network Configuration" > /dev/null
if [ $? = 0 ];then
    ifconfig -a | zenity --title="Network info" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        ifconfig -a > /tmp/networkconfinfo.txt; leafpad /tmp/networkconfinfo.txt; rm /tmp/networkconfinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "View OpenGL configuration" > /dev/null
if [ $? = 0 ];then
    glxinfo | grep OpenGL| zenity --title="View OpenGL configuration" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[2]}" -ne "1" ]; then
        glxinfo | grep OpenGL > /tmp/openglinfo.txt; leafpad /tmp/openglinfo.txt; rm /tmp/openglinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "View lsb release" > /dev/null
if [ $? = 0 ];then
    lsb_release -dic| zenity --title="lsb_release" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        lsb_release -dic > /tmp/lsbinfo.txt; leafpad /tmp/lsbinfo.txt; rm /tmp/lsbinfo.txt
    else
        exit 0
    fi
fi

[rokytnji]

I'd help if I knew how to write code.

My linux skills are I know how to converse in Linux.

When it gets to like, "Now open the language book <insert preferred languge here> and this is how the syntax goes.
I get lost because I do not know python, c, c++, or anything for that matter.

More of a monkey see, monkey do kinda of user.
I have a good memory and know how Linux file structure is laid out.

So. Here is what I did. I copied your text file and named it

inxi.sh

and saveed it in ~/Documents
Made it executable.



Let me know if I am following your idea OK so far. I will check out all the functions later on as this is a busy part of my day
working on motorcycles because the weather is getting warmer in my shop.

[rokytnji]

Lunch Time. !st button



The next are in a text file I made

Code:

#####List Partitions button#########
Disk /dev/sda: 121.3 GB, 121332826112 bytes
255 heads, 63 sectors/track, 14751 cylinders, total 236978176 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1   236978175   118489087+  ee  GPT

#########Above readout Does not show my /home partition. Since fdisk -l is invoked. Shouldn't it.
Block device button below does though###########

NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0   113G  0 disk
├─sda1   8:1    0   8.8G  0 part /
└─sda2   8:2    0 104.2G  0 part /home
sr0     11:0    1  1024M  0 rom 

#########PCI Info button (lspci -vnn)########

00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex [1022:1510]
    Subsystem: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex [1022:1510]
    Flags: bus master, 66MHz, medium devsel, latency 32

00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6250] [1002:9804] (prog-if 00 [VGA controller])
    Subsystem: Hewlett-Packard Company Device [103c:3577]
    Flags: bus master, fast devsel, latency 0, IRQ 45
    Memory at c0000000 (32-bit, prefetchable) [size=256M]
    I/O ports at 4000 [size=256]
    Memory at d0400000 (32-bit, non-prefetchable) [size=256K]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: <access denied>
    Kernel driver in use: radeon

00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
    Subsystem: Hewlett-Packard Company Device [103c:3577]
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
    I/O ports at 4118 [size=8]
    I/O ports at 4124 [size=4]
    I/O ports at 4110 [size=8]
    I/O ports at 4120 [size=4]
    I/O ports at 4100 [size=16]
    Memory at d0449000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ahci

00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
    Subsystem: Hewlett-Packard Company Device [103c:3577]
    Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
    Memory at d0448000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci-pci

00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
    Subsystem: Hewlett-Packard Company Device [103c:3577]
    Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
    Memory at d0447000 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>
    Kernel driver in use: ehci-pci

00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
    Subsystem: Hewlett-Packard Company Device [103c:3577]
    Flags: 66MHz, medium devsel
    Kernel driver in use: piix4_smbus

00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
    Subsystem: Hewlett-Packard Company Device [103c:3577]
    Flags: bus master, slow devsel, latency 32, IRQ 16
    Memory at d0440000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel

00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
    Subsystem: Hewlett-Packard Company Device [103c:3577]
    Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
    Flags: bus master, 66MHz, medium devsel, latency 64
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=64

00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
    Subsystem: Hewlett-Packard Company Device [103c:3577]
    Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
    Memory at d0446000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci-pci

00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
    I/O behind bridge: 00003000-00003fff
    Memory behind bridge: d0300000-d03fffff
    Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
    Capabilities: <access denied>
    Kernel driver in use: pcieport

00:15.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) [1002:43a1] (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
    I/O behind bridge: 00002000-00002fff
    Prefetchable memory behind bridge: 00000000d0100000-00000000d01fffff
    Capabilities: <access denied>
    Kernel driver in use: pcieport

00:15.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3) [1002:43a3] (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
    Memory behind bridge: d0200000-d02fffff
    Capabilities: <access denied>
    Kernel driver in use: pcieport

00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
    Subsystem: Hewlett-Packard Company Device [103c:3577]
    Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
    Memory at d0445000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci-pci

00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
    Subsystem: Hewlett-Packard Company Device [103c:3577]
    Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
    Memory at d0444000 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>
    Kernel driver in use: ehci-pci

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43)
    Flags: fast devsel

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1 [1022:1701]
    Flags: fast devsel

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2 [1022:1702]
    Flags: fast devsel

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3 [1022:1703]
    Flags: fast devsel
    Capabilities: <access denied>
    Kernel driver in use: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4 [1022:1704]
    Flags: fast devsel

00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6 [1022:1718]
    Flags: fast devsel

00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5 [1022:1716]
    Flags: fast devsel

00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7 [1022:1719]
    Flags: fast devsel

02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
    Subsystem: Hewlett-Packard Company Device [103c:3577]
    Flags: bus master, fast devsel, latency 0, IRQ 43
    Memory at d0300000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>
    Kernel driver in use: rtsx_pci

06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05)
    Subsystem: Hewlett-Packard Company Device [103c:3577]
    Flags: bus master, fast devsel, latency 0, IRQ 44
    I/O ports at 2000 [size=256]
    Memory at d0104000 (64-bit, prefetchable) [size=4K]
    Memory at d0100000 (64-bit, prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: r8169

07:00.0 Network controller [0280]: Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe [1814:5390]
    Subsystem: Hewlett-Packard Company U98Z077.00 Half-size Mini PCIe Card [103c:1636]
    Flags: bus master, fast devsel, latency 0, IRQ 23
    Memory at d0200000 (32-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: rt2800pci

#########Graphics button#################

00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6250] [1002:9804] (prog-if 00 [VGA controller])
    Subsystem: Hewlett-Packard Company Device [103c:3577]
    Flags: bus master, fast devsel, latency 0, IRQ 45
    Memory at c0000000 (32-bit, prefetchable) [size=256M]
    I/O ports at 4000 [size=256]
    Memory at d0400000 (32-bit, non-prefetchable) [size=256K]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: <access denied>
    Kernel driver in use: radeon

00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
    Subsystem: Hewlett-Packard Company Device [103c:3577]
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19

########USB Button##############

Bus 002 Device 002: ID 04f2:b293 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Cpu Button below



@misko. The inxi.sh script gui script closes after every info check. i have to reopen it for the next check to be done.
The one we use in AntiX. Yes we have one also. Stays open. It returns you to the menu gui to check the next item.
The one in AntiX spits out the readout in roxterm (rox terminal) so when you close the terminal. It returns you to the menu GUI.

Lunchtime. Time to eat.

Laterz, Rok

[anon222]

Thank you Rok, 
The second button was using wrong text file. That could be it. Try sudo fdisk -l
here is the new script

Code:

#! /bin/bash
#--------------------------------------------------------------------------------------------------------
# Info tool by Misko_2083
#--------------------------------------------------------------------------------------------------------

#inxi installed?
if [ -z "$(which inxi)"  ]; then

    if zenity --title="Question" --question text="Inxi is not installed, do you want to install it?\nIf you choose No program will exit."
    then
        gksudo "sudo apt-get install inxi -y" | zenity --progress --title="Installing inxi" --text="please wait" --pulsate --auto-close
                if [ "${PIPESTATUS[0]}" -ne "0" ]; then
                    zenity --error --title="Error" --text="inxi could not be installed."
                    exit
                fi
    else
        exit
    fi
fi

disk_df=(FALSE "Fs disk space info" "df -Th | grep /dev/sd" "View filesystem disk space usage")

FDISK=(FALSE "List Partitions" "sudo fdisk -l" "List out the partition information (password required)")

BLOCKDEV=(FALSE "Display Block Devices" "lsblk" "List out information all block devices")

lspci_info=(FALSE "PCI info" "lspci -vnn" "View PCI devices info")

lspci_graph=(FALSE "Graphics" "lspci -vnn | grep VGA -A 12" "View graphics devices info")

lsusb_info=(FALSE "USB info" "lsusb" "View usb devices info")

CPU=(FALSE "32/64 bit CPU" " " "Find out is this 32 or 64 bit CPU")

CPUZ=(FALSE "Processor info" "lscpu" "Display detailed info on CPU")

OS=(FALSE "32/64 bit OS" "uname -a" "Find out is this 32 or 64 bit OS")

inxi_full=(FALSE "Full info" "inxi -Fxz" "View system info")

inxi_df=(FALSE "Partition info" "inxi -plu" "View partition info")

REPOS=(FALSE "View Repositories" "inxi -r" "View repositories on this sistem")

GRAPHICS=(FALSE "View Graphics" "inxi -Gxx" "View graphics on this sistem")

AUDIO=(FALSE "View Audio" "inxi -A" "View audio on this sistem")

NETWORK=(FALSE "View Network" "inxi -nz" "View network on this sistem")

NETWORKC=(FALSE "Network Configuration" "ifconfig -a" "View network  configuration on this sistem")

OPENGL=(FALSE "View OpenGL configuration" "glxinfo | grep OpenGL" "View OpenGL configuration on this sistem")

LSB=(FALSE "View lsb release" "lsb_release -dic" "View lsb release info")

ic="/usr/share/icons/zenity-llcc.png"
selection=$(zenity --window-icon="$ic" --list --radiolist --width=900 --height=700 --column="Select" --column="Name" --column="Command" \
--column="Description" --text="Select the info tool you wish to use, then click the Display button." --title="Info" --ok-label="Display" --cancel-label="Quit" --separator="\n" \
"${disk_df[@]}" \
"${FDISK[@]}" \
"${BLOCKDEV[@]}" \
"${lspci_info[@]}" \
"${lspci_graph[@]}" \
"${lsusb_info[@]}" \
"${CPU[@]}" \
"${CPUZ[@]}" \
"${OS[@]}" \
"${inxi_full[@]}" \
"${inxi_df[@]}" \
"${REPOS[@]}" \
"${GRAPHICS[@]}" \
"${AUDIO[@]}" \
"${NETWORK[@]}" \
"${NETWORKC[@]}" \
"${OPENGL[@]}" \
"${LSB[@]}" )

# If Quit is clicked then exit
if [ "${PIPESTATUS[0]}" -ne "0" ]; then
exit 0
fi

# check if anything is selected
echo $selection | grep '[a-zA-Z0-9]'
if [ "${PIPESTATUS[1]}" -ne "0" ]; then
zenity --info --title='Info' --text='Nothing was selected.'
exit 0
fi

echo $selection | grep "^Fs disk space info" > /dev/null
if [ $? = 0 ];then
    SOME_TEXT="df - View file system disk space usage\nYou can select the mount to open in the file manager"
    SOME_TITLE="df"

    df -h -T| tail -n+2 | while read fs type size used rest target; do
        if [[ $rest ]] ; then
            echo "$fs" "$type" "$size"B "$used"B "$rest"B "${target[@]}" |  grep /dev/sd | # remove "grep /dev/sd |" to show all
            awk '{print $1,"\n",$2,"\n",$3,"\n",$4,"\n",$5,"\n",$6}BEGIN{ s = 7; e = 35; }{for (i=s; i<=e; i++) printf("%s%s", $(i), i<e ? OFS : "\n"); }' #Workaround for disk labels that contain whitespaces(number of characters that can be divided by whitespace =e-s)
        fi
    done | sed -e 's/[ \t]*$//' $1|zenity --list --width=685 --height=350 --title="${SOME_TITLE}" --text="${SOME_TEXT}" --column="Device" --column="Type" --column="Size" --column="Used" --column="Free" --column="%Used" --column="Mount" --print-column="7"| cut -d '|' -f2| tee /tmp/tempdf

    #With radiolist is also an option
    #done | sed -e 's/[ \t]*$//' $1| sed 's!^/dev/sd*!FALSE\n/dev/sd!g' | zenity --list --radiolist --width=685 --height=350 --title="${SOME_TITLE}" --text="${SOME_TEXT}" --column="Select" --column="FS" --column="Type" --column="Size" --column="Used" --column="Free" --column="%Used" --column="Mount" --print-column="8"| cut -d '|' -f2| tee /tmp/tempdf


    if [ -z "$(cat /tmp/tempdf)" ]; then
    exit 0
    fi

    xdg-open "$(cat /tmp/tempdf)"
    rm -f /tmp/tempdf
fi

echo $selection | grep "List Partitions" > /dev/null
if [ $? = 0 ];then
    gksudo --message 'To run this tool your password is required. Enter your password, or press Cancel.' 'sudo fdisk -l' |tee /tmp/fdiskinfo.txt| zenity --title="PCI info" --text-info --width=800 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[2]}" -ne "1" ]; then
         leafpad /tmp/fdiskinfo.txt
        rm /tmp/fdiskinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "Display Block Devices" > /dev/null
if [ $? = 0 ];then
    lsblk | zenity --title="PCI info" --text-info --width=800 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        lsblk > /tmp/lsblkinfo.txt; leafpad /tmp/lsblkinfo.txt; rm /tmp/lsblkinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "PCI info" > /dev/null
if [ $? = 0 ];then
    lspci -vnn | zenity --title="PCI info" --text-info --width=800 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        lspci -nn > /tmp/lspciinfo.txt; leafpad /tmp/lspciinfo.txt; rm /tmp/lspciinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "^Graphics$" > /dev/null
if [ $? = 0 ];then
    lspci -vnn | grep VGA -A 12 | zenity --title="Graphics" --text-info --width=800 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[2]}" -ne "1" ]; then
        lspci -vnn | grep VGA -A 12  > /tmp/lspcigraph.txt; leafpad /tmp/lspcigraph.txt; rm /tmp/lspcigraph.txt
    else
        exit 0
    fi
fi

echo $selection | grep "USB info" > /dev/null
if [ $? = 0 ];then
    lsusb | zenity --title="USB info" --text-info --width=800 --height=400 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        lsusb > /tmp/lsusbinfo.txt; leafpad /tmp/lsusbinfo.txt; rm /tmp/lsusbinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "32/64 bit CPU" > /dev/null
if [ $? = 0 ];then
    if [ "$(egrep -c ' lm ' /proc/cpuinfo)" -lt "1" ]; then
        bus_zen="32"
    else
        bus_zen="64"
    fi
        zenity --title="32/64 bit CPU" --info --text="This is $bus_zen bit CPU"
fi


echo $selection | grep "Processor info" > /dev/null
if [ $? = 0 ];then
    lscpu | zenity --title="Processor info" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        lscpu > /tmp/processorinfo.txt; leafpad /tmp//tmp/processorinfo.txt; rm /tmp/processorinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "32/64 bit OS" > /dev/null
if [ $? = 0 ];then
    if [ "$(uname -a | egrep -c 'i386|i486|i586|i686')" -eq "1" ]; then
        os_zen="32"
    else
        os_zen="64"
    fi
        zenity --title="32/64 bit OS" --info --text="This is $os_zen bit OS"
fi

echo $selection | grep "Full info" > /dev/null
if [ $? = 0 ];then
    inxi -Fxz -c 0 | zenity --title="Full info" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        inxi -Fxz -c 0 > /tmp/inxifull.txt; leafpad /tmp/inxifull.txt; rm /tmp/inxifull.txt
    else
        exit 0
    fi
fi

echo $selection | grep "Partition info" > /dev/null
if [ $? = 0 ];then
    inxi -plu -c 0 | zenity --title="Partition info" --text-info --width=650 --height=400 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        inxi -plu -c 0 > /tmp/partitionsinfo.txt; leafpad /tmp/partitionsinfo.txt; rm /tmp/partitionsinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "View Repositories" > /dev/null
if [ $? = 0 ];then
    inxi -r -c 0| zenity --title="Repositories" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        inxi -r -c 0 > /tmp/repositorieslist.txt; leafpad /tmp/repositorieslist.txt; rm /tmp/repositorieslist.txt
    else
        exit 0
    fi    
fi

echo $selection | grep "View Graphics" > /dev/null
if [ $? = 0 ];then
    inxi -Gxx -c 0| zenity --title="Graphics info" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        inxi -Gxx -c 0 > /tmp/graphicsinfo.txt; leafpad /tmp/graphicsinfo.txt; rm /tmp/graphicsinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "View Audio" > /dev/null
if [ $? = 0 ];then
    inxi -A -c 0| zenity --title="Audio info" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        inxi -A -c 0 > /tmp/audioinfo.txt; leafpad /tmp/audioinfo.txt; rm /tmp/audioinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "^View Network$" > /dev/null
if [ $? = 0 ];then
    inxi -nz -c 0 | zenity --title="Network info" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        inxi -nz -c 0 > /tmp/networkinfo.txt; leafpad /tmp/networkinfo.txt; rm /tmp/networkinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "Network Configuration" > /dev/null
if [ $? = 0 ];then
    ifconfig -a | zenity --title="Network info" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        ifconfig -a > /tmp/networkconfinfo.txt; leafpad /tmp/networkconfinfo.txt; rm /tmp/networkconfinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "View OpenGL configuration" > /dev/null
if [ $? = 0 ];then
    glxinfo | grep OpenGL| zenity --title="View OpenGL configuration" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[2]}" -ne "1" ]; then
        glxinfo | grep OpenGL > /tmp/openglinfo.txt; leafpad /tmp/openglinfo.txt; rm /tmp/openglinfo.txt
    else
        exit 0
    fi
fi

echo $selection | grep "View lsb release" > /dev/null
if [ $? = 0 ];then
    lsb_release -dic| zenity --title="lsb_release" --text-info --width=850 --height=600 --ok-label="Open in Leafpad" --cancel-label="Close"
    if [ "${PIPESTATUS[1]}" -ne "1" ]; then
        lsb_release -dic > /tmp/lsbinfo.txt; leafpad /tmp/lsbinfo.txt; rm /tmp/lsbinfo.txt
    else
        exit 0
    fi
fi

I think I can make the script to use check boxes instead of radio buttons. That way you can select multiple items.
The other option is to reopen the gui after each check. The AntiX way. I didn't know you have one there.
Do you have any commands to recommend? inxi or something else

[rokytnji]

inxireadout.txt.zip.
You cannot upload that type of file. The only allowed extensions are txt,pdf.

I forgot the forum limitations here. My Bad.  ???

The rest of the buttons worked OK as far as the test went. For full readout. I like

Code:

inxi -zv7

instead of

Code:

inxi -Fxz

when I post. Also for troubleshooting inxi on any new install. I run

Code:

inxi --recommends

to see what I am missing for a better inxi report.

I will delete the old inxi.sh I made from your previous script and test out the new one later on.

Happy Trails, Rok

[rokytnji]

Another tool we use in our control center for applications like this one. Localizing all things like this in a control center since we use
Window Managers in AntiX instead of Desktop Enviornments.

Well we  have a button in the control center for editing config files. Named "Edit Config Files"
What it does. It asks for your password of course. Then opens geany. In Geany.
/etc/apt/sources.lstiles
/etc/default/grub
/etc/fstab
I can't remember the others right now because I am not on my AntiX computer right now.
But to give you a general idea of our control center.



Pretty spiffy for a non Desktop Enviornment, Debian Based, Fits on a CD distro.
We run a lot of personal scripts in our distro like you are attempting to do.

Problem is. systemd is playing hell with some of those scripts  since the switch to systemd was made.
Which is making it hell trying to get AntiX 14 out the door.
I am also busy helping working out those bugs also.
So I will be stepping out from here from time to time.

[rokytnji]

Thank you Rok, 
The second button was using wrong text file. That could be it. Try sudo fdisk -l
here is the new script

Brain Fart on my end miscko. The problem is not your button. It is the way I have this partitioned. It slipped my mind I am using gpt instead of msdos in my partition layout.
I forgot.

Code:

harry@biker1:~$ sudo fdisk -l
[sudo] password for harry:

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


Disk /dev/sda: 121.3 GB, 121332826112 bytes
255 heads, 63 sectors/track, 14751 cylinders, total 236978176 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1   236978175   118489087+  ee  GPT
harry@biker1:~$ sudo parted -l
Model: ATA APPLE SSD SM128 (scsi)
Disk /dev/sda: 121GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End     Size    File system  Name  Flags
1      1049kB  9438MB  9437MB  ext4
2      9438MB  121GB   112GB   ext3

Sorry, My Bad again.  ???

[gold_finger]

Great job again misko_2083!

Just tested it out on my system (64-bit LL 2.0) and all categories worked well.

[rbdflyboy]

Nice script...works great...nice output and quick...Thanks


[sudo] password for rick:

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xeb2deb2d

  Device Boot      Start        End      Blocks  Id  System
/dev/sda1  *          63    85851388    42925663    7  HPFS/NTFS/exFAT
/dev/sda2        85852158  156301311    35224577    5  Extended
/dev/sda5      155258880  156301311      521216  82  Linux swap / Solaris
/dev/sda6        85852160  155258879    34703360  83  Linux

[shengchieh]

Personally, there is no need to "reinvent the wheel".  I just add a few codes and be done with it.  See

http://www.webupd8.org/2011/07/how-to-ge...on-in.html (How To Get Hardware Information In Linux; 7/27/11)
http://maketecheasier.com/gather-hardware-information-in-linux/2011/05/12 (http://maketecheasier.com/gather-hardwar...2011/05/12)
http://www.linux.com/learn/tutorials/620416:discovering-and-monitoring-hardware-in-linux- (Discovering and Monitoring Hardware in Linux; 8/17/12)
http://www.binarytides.com/inxi-system-information-linux/ (Inxi is an amazing tool to check hardware information on Linux; 1/8/14)
http://www.zdnet.co.uk/blogs/the-open-source-revolution-10014902/is-your-pc-slowing-down-10018071/ Is your PC slowing down?; 7/20/10)
http://www.binarytides.com/linux-cpu-information/ (8 commads to check cpu information on Linux; 3/16/14)
http://www.binarytides.com/linux-commands-hardware-info/ (16 commands to check hardware information on Linux; 4/8/14)
http://www.itworld.com/virtualization/419480/how-interpret-cpu-load-linux (How to interpret CPU load on Linux; 5/19/14)

Sheng-Chieh