LL update error

[kpanic]

Trying to guess what happened. And shame on me if I'm wrong!

The Segmentation fault came while python-crypto package tried to setup, everybody can see that in the first post.
After python-crypto failed, failed of course all the packages too which were dependent of the python-crypto package,
so we found the culprit already - no need to blame the rest of the packages since they failed because of python-crypto.

Why did I ask for the amount of memory?
Because lack of writable memory leads to Segmentation faults. The memory pointer points to a segment which the
kernel cannot map to user space. You can probably malloc(3) 20G of memory but if you don't actually have it and you try to
write into unmapped segment of it, the kernel cannot do anything else but kill the process.

In short: I think [member=7608]pkmaarsen[/member] 's computer does not meet the minimum requirements to install 32bit 3.8.

[DeepThought]

In short: I think [member=7608]pkmaarsen[/member] 's computer does not meet the minimum requirements to install 32bit 3.8.

[member=7701]kpanic[/member]  Interesting assumption..... but if you look at his set up, showing under his name...

CPU: 4400 2.00 GHZ
MEMORY: 2Gb

I'd say that was more than sufficient to run a 32 bit 3.8 Linux Lite

[kpanic]

Very good point [member=7644]DeepThought[/member] , I didn't even think about those stats.

But now that you reminded me, and yet he seems to have 3.2 but he says he is "installing updates for 3.8".
So, he has installed 3.8 into some computer and he is trying to update it.
But is it even the same computer as this 3.2 is?

It would be nice to hear from him, since this is mainly his problem after all

[charvie]

I agree with kpanic about the 'segmentation fault'.  Sometimes, on rare occasions, this fault is due to bad memory.  It wouldn't hurt to due a memory test.

If memory is good, although linux die-hards hate to, this may be one of those time when a wipe and fresh install is the quickest way to get past this problem.  It would be an opportunity to upgrade to LL 4.  The machine I am using at this moment is an AMD A4-3300 with 2Gb of ram and LL 4 (64 bit) runs fine on it. 

Charvie

[charvie]

Follow up on my previous post:

CPU Performance Comparison
Performance of selected CPUs can be found below. The values for the CPU are determined from thousands of PerformanceTest benchmark results and is updated daily.

                  Intel Core2 Duo E4400 @ 2.00GHz AMD A4-3300 APU Intel Atom D2500 @ 1.86GHz

CPU Class           Desktop                                 Desktop                         Desktop
Clock speed           2.0 GHz                                  2.5 GHz                         1.9 GHz
Turbo Speed           Not Sup                                  Not Sup                         Not Sup
# of Physical Cores         2                                               2                               2
Max TDP                  65W                                               65W                               10W
Single Thread Rating 735                                               838                               292
CPU Mark                       1158                                             1506                               404

This is a comparison of your cpu and two of mine that are running LL 4.  In fact the Atom D2500, which has a cpu mark of only 404, is running my home theater with no problems at all.  So you should be able to install and run LL 4.  You can't upgrade from LL 3 series to LL4. It must be a new install.  If you decide to go this way and do not plan on using vbox, be sure to follow Jerry's instructions in the Linux Lite 4.0 Final Release Announcement under Performance Tips.  It will decrease boot time.

[pkmaarsen]

Hi guys. After waking up, I see you have given me some homework. Iĺl try to do this stepwise. So first, I have to admit that I upgraded from 3.2 to 3.8 LL. I had problems with running LL 3.2 on this PC (which had been running Linux Mint 14 without any problem). So I tried to reinstall and why not the most recent version?
Now I did the memory test with appended result.

linuxlite@linuxlite-System-Product-Name:~$ sudo lshw -c memory
[sudo] password for linuxlite:
  *-firmware             
      description: BIOS
      vendor: American Megatrends Inc.
      physical id: 0
      version: 0602
      date: 05/08/2007
      size: 64KiB
      capacity: 448KiB
      capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
  *-cache:0
      description: L1 cache
      physical id: 5
      slot: L1-Cache
      size: 32KiB
      capacity: 32KiB
      capabilities: pipeline-burst internal varies data
      configuration: level=1
  *-cache:1
      description: L2 cache
      physical id: 6
      slot: L2-Cache
      size: 2MiB
      capacity: 2MiB
      capabilities: pipeline-burst internal varies unified
      configuration: level=2
  *-memory
      description: System Memory
      physical id: 27
      slot: System board or motherboard
      size: 2GiB
    *-bank:0
          description: DIMM DDR2 Synchronous
          product: PartNum0
          vendor: Manufacturer0
          physical id: 0
          serial: SerNum0
          slot: DIMM0
          size: 1GiB
          width: 64 bits
    *-bank:1
          description: DIMM DDR2 Synchronous
          product: PartNum1
          vendor: Manufacturer1
          physical id: 1
          serial: SerNum1
          slot: DIMM1
          size: 1GiB
          width: 64 bits
linuxlite@linuxlite-System-Product-Name:~$

Yes, it is a very old PC. My motto is: if I can keep it running, I will. If not, I will buy another one. I had been running LL 3.8 on a HP 7800 desktop (from 2009) without any problem. I gave it to my daughter as a replacement for the present one (with LM 14). I could have thrown it away (which I should have done?).
I am going to work out the other suggestions. You will certainly hear from me.

[pkmaarsen]

Hi Deep Thought, I have carried the commands you suggested. The result is a long list of which I only send you the last part.

Package 'python3-photutils' is not installed, so not removed
Package 'python3-pip' is not installed, so not removed
Package 'python3-powerline' is not installed, so not removed
Package 'python3-pymysql' is not installed, so not removed
Package 'python3-pysha3' is not installed, so not removed
Package 'python3-pyxs' is not installed, so not removed
Package 'python3-rfc3986' is not installed, so not removed
Package 'python3-s3transfer' is not installed, so not removed
Package 'python3-spectral-cube' is not installed, so not removed
Package 'python3-sss' is not installed, so not removed
Package 'python3-ubuntu-image' is not installed, so not removed
Package 'python3-ubuntutools' is not installed, so not removed
Package 'python3-uwsgidecorators' is not installed, so not removed
Package 'python3-virtualenv' is not installed, so not removed
Package 'python3-wcsaxes' is not installed, so not removed
Package 'python-nova' is not installed, so not removed
Package 'python-nova-lxd' is not installed, so not removed
Package 'python-pylxd' is not installed, so not removed
Package 'python-pylxd-doc' is not installed, so not removed
Package 'python-acme' is not installed, so not removed
Package 'python-acme-doc' is not installed, so not removed
Package 'python-certbot' is not installed, so not removed
Package 'python-certbot-apache' is not installed, so not removed
Package 'python-certbot-apache-doc' is not installed, so not removed
Package 'python-certbot-doc' is not installed, so not removed
Package 'python-certbot-nginx' is not installed, so not removed
Package 'python-certbot-nginx-doc' is not installed, so not removed
Package 'python-nova.lxd' is not installed, so not removed
Package 'python-pymacaroons' is not installed, so not removed
Package 'python3-acme' is not installed, so not removed
Package 'python3-novaagent' is not installed, so not removed
Package 'python3-pylxd' is not installed, so not removed
Package 'python3-pymacaroons' is not installed, so not removed
Package 'python3-lxc' is not installed, so not removed
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies:
alacarte : Depends: python:any (>= 2.6.6-7~)
            Depends: python-gi (>= 3.0) but it is not going to be installed
apparmor : Depends: python3:any
apt-clone : Depends: python3:any (>= 3.3.2-2~)
            Depends: python3-apt but it is not going to be installed
            Depends: python3 but it is not going to be installed
apt-xapian-index : Depends: python3-xapian1.3 but it is not going to be installed
                    Depends: python3-apt (>= 0.7.93.2) but it is not going to be installed
                    Depends: python3-debian (>= 0.1.14) but it is not going to be installed
                    Depends: python3:any (>= 3.4~)
aptdaemon : Depends: python3 but it is not going to be installed
            Depends: python3:any (>= 3.2~)
            Depends: python3-aptdaemon (= 1.1.1+bzr982-0ubuntu14) but it is not going to be installed
            Depends: python3-gi but it is not going to be installed
blueman : Depends: python3 (< 3.6) but it is not going to be installed
          Depends: python3 (>= 3.5~) but it is not going to be installed
          Depends: python3-dbus but it is not going to be installed
          Depends: python3-gi but it is not going to be installed
          Depends: python3-cairo but it is not going to be installed
          Depends: python3-gi-cairo but it is not going to be installed
catfish : Depends: python3:any (>= 3.3.2-2~)
          Depends: python3-gi-cairo but it is not going to be installed
          Depends: python3-pexpect but it is not going to be installed
command-not-found : Depends: python3-commandnotfound (>= 0.3ubuntu7) but it is not going to be installed
compiz-gnome : Depends: python3-gi but it is not going to be installed
                Recommends: gnome-system-monitor but it is not going to be installed or
                            mate-system-monitor but it is not going to be installed
dh-python : Depends: python3:any (>= 3.3.2-2~)
duplicity : Depends: python (>= 2.7) but it is not going to be installed
            Depends: python (< 2.8) but it is not going to be installed
            Depends: python-lockfile (> 1:0.9) but it is not going to be installed
foomatic-db-compressed-ppds : Depends: python3 but it is not going to be installed
gconf2 : Depends: python3:any
gdebi : Depends: python3:any (>= 3.3.2-2~)
        Depends: python3-gi but it is not going to be installed
gdebi-core : Depends: python3:any (>= 3.3.2-2~)
              Depends: python3-apt but it is not going to be installed
              Depends: python3-debian but it is not going to be installed
gimp : Depends: python-gtk2 (>= 2.8.0) but it is not going to be installed
        Depends: python:any (>= 2.6.6-7~)
        Depends: python2.7 but it is not going to be installed
gir1.2-ibus-1.0 : Depends: python3:any (>= 3.3.2-2~)
gnome-hearts : Depends: python:any (>= 2.7.5-5~)
gnome-menus : Depends: python3:any (>= 3.1~)
gufw : Depends: python:any (>= 2.6.6-7~)
        Depends: python-netifaces but it is not going to be installed
        Depends: python-gi but it is not going to be installed
hplip : Depends: python3-dbus (>= 0.80) but it is not going to be installed
        Depends: python3-gi but it is not going to be installed
        Depends: python3-pexpect but it is not going to be installed
        Depends: python3-pil but it is not going to be installed
        Depends: python3-reportlab but it is not going to be installed
        Depends: python3 (< 3.6) but it is not going to be installed
        Depends: python3 (>= 3.5~) but it is not going to be installed
hplip-data : Depends: python3:any (>= 3.3.2-2~)
ibus : Depends: python3-gi but it is not going to be installed
        Depends: python3:any (>= 3.3.2-2~)
language-selector-common : Depends: python3:any (>= 3.3.2-2~)
                            Depends: python3-apt (>= 0.7.12.0) but it is not going to be installed
                            Depends: python3-dbus but it is not going to be installed
language-selector-gnome : Depends: python3:any (>= 3.3.2-2~)
                          Depends: python3-gi but it is not going to be installed
                          Depends: python3-apt but it is not going to be installed
                          Depends: python3-aptdaemon.gtk3widgets but it is not going to be installed
light-locker-settings : Depends: python:any (>= 2.7.5-5~)
                        Depends: python-psutil but it is not going to be installed
lightdm-gtk-greeter-settings : Depends: python3:any (>= 3.3.2-2~)
                                Depends: python3-gi (>= 3.0) but it is not going to be installed
lite-usermanager : Depends: python-pexpect but it is not going to be installed
lite-welcome : Depends: python-simplejson but it is not going to be installed
lsb-release : Depends: python3:any (>= 3.4~)
mugshot : Depends: python3-cairo but it is not going to be installed
          Depends: python3-dbus but it is not going to be installed
          Depends: python3-pexpect but it is not going to be installed
          Depends: python3:any (>= 3.3.2-2~)
ntfs-config : Depends: python (>= 2.7) but it is not going to be installed
              Depends: python (< 2.8) but it is not going to be installed
              Depends: python-glade2 but it is not going to be installed
printer-driver-foo2zjs-common : Depends: python3 but it is not going to be installed
printer-driver-postscript-hp : Depends: python3 but it is not going to be installed
sessioninstaller : Depends: python3:any (>= 3.3.2-2~)
                    Depends: python3-aptdaemon.gtk3widgets but it is not going to be installed
                    Depends: python3-commandnotfound but it is not going to be installed
                    Depends: python3-defer but it is not going to be installed
                    Depends: python3-gi but it is not going to be installed
                    Depends: python3-xdg but it is not going to be installed
software-properties-common : Depends: python3:any (>= 3.3.2-2~)
                              Depends: python3 but it is not going to be installed
                              Depends: python3-gi but it is not going to be installed
                              Depends: python-apt-common (>= 0.9) but it is not going to be installed
                              Depends: python3-dbus but it is not going to be installed
                              Depends: python3-software-properties (= 0.96.20.7) but it is not going to be installed
software-properties-gtk : Depends: python3:any (>= 3.3.2-2~)
                          Depends: python3 but it is not going to be installed
                          Depends: python3-software-properties (= 0.96.20.7) but it is not going to be installed
                          Depends: python3-gi but it is not going to be installed
                          Depends: python3-aptdaemon.gtk3widgets but it is not going to be installed
system-config-printer-common : Depends: python3-cups (>= 1.9.60) but it is not going to be installed
                                Depends: python3-dbus but it is not going to be installed
                                Depends: python3-cupshelpers but it is not going to be installed
system-config-printer-gnome : Depends: python3-gi but it is not going to be installed
                              Depends: python3-lxml but it is not going to be installed
                              Depends: python3-requests but it is not going to be installed
                              Depends: python3-cairo but it is not going to be installed
                              Depends: packagekit-system-interface
system-config-printer-udev : Depends: python3-cups (>= 1.9.55) but it is not going to be installed
                              Depends: python3-dbus but it is not going to be installed
                              Depends: python3-cupshelpers but it is not going to be installed
ubiquity : Depends: python3:any (>= 3.3.2-2~)
            Depends: python3-apt (>= 0.7.100.3~) but it is not going to be installed
            Depends: python3-icu (>= 1.0) but it is not going to be installed
            Depends: python3-pam but it is not going to be installed
ubiquity-frontend-debconf : Depends: python3:any (>= 3.3.2-2~)
ubiquity-frontend-gtk : Depends: python3:any (>= 3.3.2-2~)
                        Depends: python3-dbus but it is not going to be installed
                        Depends: python3-gi but it is not going to be installed
                        Depends: python3-cairo but it is not going to be installed
                        Depends: python3-gi-cairo but it is not going to be installed
ubuntu-drivers-common : Depends: python3:any (>= 3.3.2-2~)
                        Depends: python3-apt but it is not going to be installed
                        Depends: python3-xkit but it is not going to be installed
ubuntu-minimal : Depends: python3 but it is not going to be installed
ubuntu-release-upgrader-core : Depends: python3:any (>= 3.2~)
                                Depends: python3-distupgrade (= 1:16.04.25) but it is not going to be installed
ufw : Depends: python3:any (>= 3.3.2-2~)
update-manager-core : Depends: python3:any (>= 3.2~)
                      Depends: python3-update-manager (= 1:16.04.13) but it is not going to be installed
update-notifier-common : Depends: python3:any
                          Depends: python3-apt but it is not going to be installed
                          Depends: python3-dbus but it is not going to be installed
                          Depends: python3-debian but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
linuxlite@linuxlite-System-Product-Name:~$ sudo apt-get autoremove
Reading package lists... Done
Building dependency tree     
Reading state information... Done
You might want to run 'apt-get -f install' to correct these.
The following packages have unmet dependencies:
python-smbc : Depends: libsmbclient (>= 2:4.0.3+dfsg1) but it is not installed
E: Unmet dependencies. Try using -f.
linuxlite@linuxlite-System-Product-Name:~$ sudo apt-get clean
linuxlite@linuxlite-System-Product-Name:~$ sudo apt-get -f install
Reading package lists... Done
Building dependency tree     
Reading state information... Done
Correcting dependencies... Done
The following packages were automatically installed and are no longer required:
  attr libaio1 libcdio-cdda1 libcdio-paranoia1 libgdata-common libgdata22
  libgoa-1.0-0b libgoa-1.0-common liboauth0 libsystemback systemback-cli
  systemback-locales systemback-scheduler
Use 'sudo apt autoremove' to remove them.
The following additional packages will be installed:
  libsmbclient samba-libs
The following NEW packages will be installed:
  libsmbclient samba-libs
0 upgraded, 2 newly installed, 0 to remove and 3 not upgraded.
2 not fully installed or removed.
Need to get 5608 kB of archives.
After this operation, 25,4 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://us.archive.ubuntu.com/ubuntu xenial-security/main i386 samba-libs i386 2:4.3.11+dfsg-0ubuntu0.16.04.13 [5551 kB]
Get:2 http://us.archive.ubuntu.com/ubuntu xenial-security/main i386 libsmbclient i386 2:4.3.11+dfsg-0ubuntu0.16.04.13 [57,3 kB]
Fetched 5608 kB in 5s (944 kB/s)     
Selecting previously unselected package samba-libs:i386.
(Reading database ... 208770 files and directories currently installed.)
Preparing to unpack .../samba-libs_2%3a4.3.11+dfsg-0ubuntu0.16.04.13_i386.deb ...
Unpacking samba-libs:i386 (2:4.3.11+dfsg-0ubuntu0.16.04.13) ...
Selecting previously unselected package libsmbclient:i386.
Preparing to unpack .../libsmbclient_2%3a4.3.11+dfsg-0ubuntu0.16.04.13_i386.deb ...
Unpacking libsmbclient:i386 (2:4.3.11+dfsg-0ubuntu0.16.04.13) ...
Processing triggers for libc-bin (2.23-0ubuntu10) ...
Processing triggers for man-db (2.7.5-1) ...
Setting up python-crypto (2.6.1-6ubuntu0.16.04.3) ...
Segmentation fault
dpkg: error processing package python-crypto (--configure):
subprocess installed post-installation script returned error exit status 239
Setting up samba-libs:i386 (2:4.3.11+dfsg-0ubuntu0.16.04.13) ...
Setting up libsmbclient:i386 (2:4.3.11+dfsg-0ubuntu0.16.04.13) ...
Setting up python-smbc (1.0.15.5-1) ...
Fatal Python error: GC object already tracked
Aborted
dpkg: error processing package python-smbc (--configure):
subprocess installed post-installation script returned error exit status 134
Processing triggers for libc-bin (2.23-0ubuntu10) ...
Errors were encountered while processing:
python-crypto
python-smbc
E: Sub-process /usr/bin/dpkg returned an error code (1)
linuxlite@linuxlite-System-Product-Name:~$

Again, a segmentation fault is mentioned. Although I think it is useless, I will reboot.
Ciao, Paul

[pkmaarsen]

After rebooting and updating, the answer was: Your system is up-to-date. I guess why nothing has been removed?
Paul.
Maybe I should try to install LL 4 (64 bits)? Unless my memory is insufficient.
Iḿ waiting for your comments. Ciao, Paul

[DeepThought]

From: https://www.freecinema2022.gq/forums/relea...-released/

Preferred Specs:
1.5GHz processor+
1024mb ram+
20gb HDD/SSD+
VGA, DVI or HDMI screen capable of 1366x768 resolution+
DVD drive or USB port for the ISO image

So your specs should run LL 4.0

I would check that your cpu is 64 bit capable with the following command

$ sudo lshw -C processor | grep width

Enter your password and you should see as a result:

width: 64 bits

If this is your result go ahead and try installing LL 4.0

[charvie]

Paul,

2Gb is more than enough to run LL 4. The system I am using right now has 2Gb of memory and I average using only 50% and that includes memory that is used for video because of the AMD A4 processor.  Since, by your system specs, you have a video card, which should have it's own memory, you will most likely use less.

Burn a live DVD or USB and run it.  If it runs off of the live version there is no reason it won't run after installed.

Charvie