network share drives me mad

[Wirezfree]

Hi greenisland,

I have recently been through this again on a new LL2.2 install and it worked again for me...
It's baffling why it should work manually on the 2nd run of the manual sudo command.??

First, lets check network connectivity/timing,
try to ping the NAS by IP, then name, see if there are any name resolution/timing issues.?
((use your IP NAS address/name, and a ctrl c to stop the ping))

By I.P

Code:

dave@asus-mini-1:~$ ping 10.10.100.110
PING 10.10.100.110 (10.10.100.110) 56(84) bytes of data.
64 bytes from 10.10.100.110: icmp_seq=1 ttl=64 time=0.338 ms
64 bytes from 10.10.100.110: icmp_seq=2 ttl=64 time=0.313 ms
64 bytes from 10.10.100.110: icmp_seq=3 ttl=64 time=0.268 ms
^C
--- 10.10.100.110 ping statistics ---
8 packets transmitted, 8 received, 0% packet loss, time 6998ms
rtt min/avg/max/mdev = 0.268/0.306/0.338/0.023 ms
dave@asus-mini-1:~$

Then name

Code:

dave@asus-mini-1:~$ ping nas1-syn
PING nas1-syn (10.10.100.110) 56(84) bytes of data.
64 bytes from 10.10.100.110: icmp_seq=1 ttl=64 time=0.263 ms
64 bytes from 10.10.100.110: icmp_seq=2 ttl=64 time=0.298 ms
64 bytes from 10.10.100.110: icmp_seq=3 ttl=64 time=0.299 ms
^C
--- nas1-syn ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 4998ms
rtt min/avg/max/mdev = 0.263/0.292/0.311/0.019 ms
dave@asus-mini-1:~$

I chopped a bit of the results out to keep post small.
Do both commands work & timings look similar.?

Dave