11-20-2023, 01:25 PM
(11-20-2023, 01:03 PM)stevef link Wrote: To check your driver theory post back with the outputs of this command run in both boot scenarios.
You may want to mask the WAN IP address.Code:inxi -ni
Running that command gives the following:
Booting from USB
Network:
Device-1: Intel Ethernet I219-V driver: e1000e
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: 88:05:69:24:35:f8
IP v4: 192.168.8.110/24 type: dynamic noprefixroute scope: global
IP v6: fd14:de39:dda1:6900:f99f:e573:8a89:1638/64 type: temporary dynamic
scope: global
IP v6: fd14:de39:dda1:6900:d427:370b:22d8:ef80/64
type: dynamic mngtmpaddr noprefixroute scope: global
IP v6: fe80::3824:f2d0:1746:2269/64 type: noprefixroute scope: link
Device-2: Intel Wireless 7265 driver: iwlwifi
IF: wlp1s0 state: down mac: a0:a4:c5:b4:46:41
WAN IP: 31.94.71.180
Booting from PC:
Network:
Device-1: Intel Ethernet I219-V driver: e1000e
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: 88:05:69:24:35:f8
IP v4: 192.168.8.110/24 type: dynamic noprefixroute scope: global
IP v6: fd14:de39:dda1:6900:7013:abfe:de3a:692/64 type: temporary dynamic
scope: global
IP v6: fd14:de39:dda1:6900:d427:370b:22d8:ef80/64
type: dynamic mngtmpaddr noprefixroute scope: global
IP v6: fe80::3824:f2d0:1746:2269/64 type: noprefixroute scope: link
Device-2: Intel Wireless 7265 driver: iwlwifi
IF: wlp1s0 state: down mac: a0:a4:c5:b4:46:41
IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
IP v4: 10.10.0.8/16 scope: global
IP v6: fe80::b291:da71:92ad:22b2/64 virtual: stable-privacy scope: link
IF-ID-2: vboxnet0 state: up speed: 10 Mbps duplex: full
mac: 0a:00:27:00:00:00
IP v4: 192.168.56.1/24 scope: global
IP v6: fe80::800:27ff:fe00:0/64 scope: link
WAN IP: ;; communications error to 208.67.222.222#53: connection refused