Ok, thanks for the reply. I found another one in my stuff that is branded.
It is a TP-Link 108M (probably old!).
Here is the result from the terminal commands that you posted:
sudo lshw -C network
[sudo] password for jim:
*-network
description: Ethernet interface
product: NetLink BCM5906M Fast Ethernet PCI Express
vendor: Broadcom Inc. and subsidiaries
physical id: 0
bus info: pci@0000:06:00.0
logical name: enp6s0
version: 02
serial: b8:ac:6f:a1:fa:80
size: 100Mbit/s
capacity: 100Mbit/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=5.17.0-1015-oem duplex=full firmware=sb v3.04 ip=192.168.1.101 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
resources: irq:31 memory:febf0000-febfffff
jim ~ lsusb
Bus 002 Device 006: ID 0cf3:0002 Qualcomm Atheros Communications AR5523 (no firmware)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 03f0:094a HP, Inc Optical Mouse [672662-001]
Bus 004 Device 002: ID 046d:c52a Logitech, Inc. 2.4GHz Cordless Desktop
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 046d:0962 Logitech, Inc. OEM Camera
Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 1926:0066 NextWindow 1950 HID Touchscreen
Bus 003 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard SK-8115
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
jim ~
Also, can you please instruct me on the correct way to post the terminal output.
I am accustomed to the Linux Mint forums, but could not find anything like it here.
I am looking for the code insert symbol.
Thanks again,
Jim.
It is a TP-Link 108M (probably old!).
Here is the result from the terminal commands that you posted:
sudo lshw -C network
[sudo] password for jim:
*-network
description: Ethernet interface
product: NetLink BCM5906M Fast Ethernet PCI Express
vendor: Broadcom Inc. and subsidiaries
physical id: 0
bus info: pci@0000:06:00.0
logical name: enp6s0
version: 02
serial: b8:ac:6f:a1:fa:80
size: 100Mbit/s
capacity: 100Mbit/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=5.17.0-1015-oem duplex=full firmware=sb v3.04 ip=192.168.1.101 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
resources: irq:31 memory:febf0000-febfffff
jim ~ lsusb
Bus 002 Device 006: ID 0cf3:0002 Qualcomm Atheros Communications AR5523 (no firmware)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 03f0:094a HP, Inc Optical Mouse [672662-001]
Bus 004 Device 002: ID 046d:c52a Logitech, Inc. 2.4GHz Cordless Desktop
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 046d:0962 Logitech, Inc. OEM Camera
Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 1926:0066 NextWindow 1950 HID Touchscreen
Bus 003 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard SK-8115
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
jim ~
Also, can you please instruct me on the correct way to post the terminal output.
I am accustomed to the Linux Mint forums, but could not find anything like it here.
I am looking for the code insert symbol.
Thanks again,
Jim.