Hi, [member=6733]TheDead[/member], you were right about the external monitor, you made me tought that there is something missing on my BIOS configuration and at last I remember what is it.
I am ashamed because I ckeck the BIOS settings and i have the video and sound card in PCI instead of on board, because I tried to install another video card unsuccessfully and forgot to change this setting.
Although the change was fine and the output of
sudo pulseaudio --kill whas done, the problem persist with the audio.
This is the output of the the following terminal command:
pulseaudio --dump-conf
### Leyendo desde el archivo de confioguración: /etc/pulse/daemon.conf ###
daemonize = no
fail = yes
high-priority = yes
nice-level = -11
realtime-scheduling = yes
realtime-priority = 5
allow-module-loading = yes
allow-exit = yes
use-pid-file = yes
system-instance = no
local-server-type = user
cpu-limit = no
enable-shm = yes
flat-volumes = no
rescue-streams = yes
lock-memory = no
exit-idle-time = 20
scache-idle-time = 20
dl-search-path = /usr/lib/pulse-13.99.1/modules
default-script-file = /etc/pulse/default.pa
load-default-script-file = yes
log-target =
log-level = notice
resample-method = auto
avoid-resampling = no
enable-remixing = yes
remixing-use-all-sink-channels = yes
remixing-produce-lfe = no
remixing-consume-lfe = no
lfe-crossover-freq = 0
default-sample-format = s16le
default-sample-rate = 44100
alternate-sample-rate = 48000
default-sample-channels = 2
default-channel-map = front-left,front-right
default-fragments = 4
default-fragment-size-msec = 25
enable-deferred-volume = yes
deferred-volume-safety-margin-usec = 1
deferred-volume-extra-delay-usec = 0
shm-size-bytes = 0
log-meta = no
log-time = no
log-backtrace = 0
rlimit-fsize = -1
rlimit-data = -1
rlimit-stack = -1
rlimit-core = -1
rlimit-rss = -1
rlimit-as = -1
rlimit-nproc = -1
rlimit-nofile = 256
rlimit-memlock = -1
rlimit-locks = -1
rlimit-sigpending = -1
rlimit-msgqueue = -1
rlimit-nice = 31
rlimit-rtprio = 9
rlimit-rttime = 200000
The other output I posted above are valid.
I could add the output of the comand lspci -v
00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
Subsystem: ASRock Incorporation MCP61 High Definition Audio
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21, NUMA node 0
Memory at efdf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
Regards,
I am ashamed because I ckeck the BIOS settings and i have the video and sound card in PCI instead of on board, because I tried to install another video card unsuccessfully and forgot to change this setting.
Although the change was fine and the output of
sudo pulseaudio --kill whas done, the problem persist with the audio.
This is the output of the the following terminal command:
pulseaudio --dump-conf
### Leyendo desde el archivo de confioguración: /etc/pulse/daemon.conf ###
daemonize = no
fail = yes
high-priority = yes
nice-level = -11
realtime-scheduling = yes
realtime-priority = 5
allow-module-loading = yes
allow-exit = yes
use-pid-file = yes
system-instance = no
local-server-type = user
cpu-limit = no
enable-shm = yes
flat-volumes = no
rescue-streams = yes
lock-memory = no
exit-idle-time = 20
scache-idle-time = 20
dl-search-path = /usr/lib/pulse-13.99.1/modules
default-script-file = /etc/pulse/default.pa
load-default-script-file = yes
log-target =
log-level = notice
resample-method = auto
avoid-resampling = no
enable-remixing = yes
remixing-use-all-sink-channels = yes
remixing-produce-lfe = no
remixing-consume-lfe = no
lfe-crossover-freq = 0
default-sample-format = s16le
default-sample-rate = 44100
alternate-sample-rate = 48000
default-sample-channels = 2
default-channel-map = front-left,front-right
default-fragments = 4
default-fragment-size-msec = 25
enable-deferred-volume = yes
deferred-volume-safety-margin-usec = 1
deferred-volume-extra-delay-usec = 0
shm-size-bytes = 0
log-meta = no
log-time = no
log-backtrace = 0
rlimit-fsize = -1
rlimit-data = -1
rlimit-stack = -1
rlimit-core = -1
rlimit-rss = -1
rlimit-as = -1
rlimit-nproc = -1
rlimit-nofile = 256
rlimit-memlock = -1
rlimit-locks = -1
rlimit-sigpending = -1
rlimit-msgqueue = -1
rlimit-nice = 31
rlimit-rtprio = 9
rlimit-rttime = 200000
The other output I posted above are valid.
I could add the output of the comand lspci -v
00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
Subsystem: ASRock Incorporation MCP61 High Definition Audio
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21, NUMA node 0
Memory at efdf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
Regards,