Feedback, webcam software not working

[avj]

    The webcam software in Lite Software is not working on this netbook. I am running LL 2.8 32 bit. It worked well in 2.6, but now it doesn't show anything from the camera, just a black window. I tried reinstalling the software, but that did nothing. I used lsusb and my camera show up as:  Bus 001 Device 004: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera. I have uninstalled the software, and installed camorama in its place and everything works fine. Just thought the development team should be aware.

A little more info, the camorama software only supports still captures not video.

[firenice03]

@avj
I think we have very similar netbooks
Mines a Dell Inspiron Mini - Atom N270 1.6Ghz - 1GB - Intel Mobile 945GSE Express

I'll check mine this evening, can't recall if I installed the webcam since I upgraded to 2.8..

If anything good to know if issue replicates..

[Wirezfree]

Hi,

From some early rough notes, I think my daughters laptop..??:

Code:

dmesg | grep uvcvideo

If you see "failed to initialise -5 error"
Try:

Code:

sudo rmmod uvcvideo

then

Code:

sudo modprobe uvcvideo

Then see if LL Webcam S/W(guvcview?) works

[avj]

To Wirezfree, The software is guvcview. When I run the "dmesg | grep uvcvideo" in a terminal I get the following.

Code:

[   36.543538] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[   36.572932] usbcore: registered new interface driver uvcvideo

If I run guvcview from a terminal I get the following.

Code:

guvcview 1.7.1
file guvcview_video.mkv has extension type 1
file guvcview_image.jpg has extension type 0
file guvcview_image.jpg has extension type 0
Video file suffix detected: 0
Image file suffix detected: 0
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
jack server is not running or cannot be started
video device: /dev/video0
Init. USB 2.0 Camera (location: usb-0000:00:1d.7-5)
{ pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' }
{ discrete: width = 640, height = 480 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 352, height = 288 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 320, height = 240 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 176, height = 144 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 160, height = 120 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ pixelformat = 'RGB3', description = 'RGB3' }
{ discrete: width = 640, height = 480 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 352, height = 288 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 320, height = 240 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 176, height = 144 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 160, height = 120 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ pixelformat = 'BGR3', description = 'BGR3' }
{ discrete: width = 640, height = 480 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 352, height = 288 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 320, height = 240 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 176, height = 144 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 160, height = 120 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ pixelformat = 'YU12', description = 'YU12' }
{ discrete: width = 640, height = 480 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 352, height = 288 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 320, height = 240 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 176, height = 144 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 160, height = 120 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ pixelformat = 'YV12', description = 'YV12' }
{ discrete: width = 640, height = 480 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 352, height = 288 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 320, height = 240 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 176, height = 144 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
{ discrete: width = 160, height = 120 }
    Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5,
vid:0c45
pid:62c0
driver:uvcvideo
checking format: 1448695129
fps is set to 1/30
drawing controls

fps is set to 1/30
Checking video mode 640x480@32bpp : OK
write /home/albert/.config/guvcview/video0 OK
free controls
cleaned allocations - 100%
Closing portaudio ...OK
Closing GTK... OK

[Wirezfree]

O.K,
It appears to be recognised and there,
I think the first few unknowns, failed, and jack are all Audio items, so should not affect video.
Not sure what else to suggest... Maybe somebody else will come along with suggestions.

What kernel are you using, I found this:
https://sourceforge.net/p/guvcview/tickets/13/

[avj]

According to Lite Control Center I am running kernel 3.19.0-33-generic.

I did find a bug report on launchpad that appears to be the same issue from the link that you posted.

https://bugs.launchpad.net/ubuntu/+sourc...ug/1448694

[firenice03]

avj..

If it helps...
Mine is working.. 2.6 upgraded to 2.8..
Kernel: Linux 3.13.0-24-generic

Let me know if anyone needs any command outputs if it would help...

[avj]

Thanks firenice03, I was hoping to avoid having to do that but it looks like it may be the only alternative.

[Valtam]

Have you tried Cheese? I've had guvcview not work, then Cheese work on the same pc. Strange, I know.

Sent from my Nexus 6 using Tapatalk

[avj]

I tried Cheese, but it was a little too resource hungry and started lagging out my computer.  I eventually had to kill the app from the task manager. I was able to confirm that this isn't a hardware issue by using a system back live DVD of my former LL 2.6 system using guvcview, and was able to take photos, and make a video.  It is looking more and more like I may have to go the upgrade route, unless someone has other suggestions.