New computer = never going back to MacOS or Windows

[Coastie]

Bought a new ASUS M32 AMD CPU as described in profile. Installed Linux Lite on entire hard drive even though there was plenty of room for it on 2 TB. I have been so satisfied with Linux Lite, I knew I was never going back to Mac or Windows.  8) 

[img height=104 width=125]http://images.duckduckgo.com/iu/?u=http%3A%2F%2Ftse2.mm.bing.net%2Fth%3Fid%3DJN.XHwB1FluE%252fCA1DyLacD89Q%26pid%3D15.1&f=1[/img]

Went with AMD instead of Intel because thanks to Apple getting in bed the OS on my iMac PPC is unsupported. I guess I am just a rebel at heart. 

[rokytnji]

Here I was hoping to see a

Code:

inxi -Fxx

report to see the details on your new rig. Nice buy by the way. Congratulations.

[OldGuy]

I'm using an A-10 laptop right now myself.  It runs well...

[Coastie]

Here I was hoping to see a

Code:

inxi -Fxx

report to see the details on your new rig. Nice buy by the way. Congratulations.

0BF-M32BF Kernel: 3.13.0-24-generic i686 (32 bit, gcc: 4.8.2)
          Desktop: Xfce 4.11.8 (Gtk 2.24.23) dm: lightdm Distro: Ubuntu 14.04 trusty
Machine:  Mobo: ASUSTeK model: K30BF_M32BF version: Rev X.0x Bios: American Megatrends version: 0209 date: 04/02/2014
CPU:      Quad core AMD A10-6700 APU with Radeon HD Graphics (-MCP-) cache: 8192 KB flags: (lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 29598.7
          Clock Speeds: 1: 1800.00 MHz 2: 1800.00 MHz 3: 1800.00 MHz 4: 3700.00 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Richland [Radeon HD 8670D] bus-ID: 00:01.0 chip-ID: 1002:990c
          X.Org: 1.15.1 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: [email protected]
          GLX Renderer: Gallium 0.4 on AMD ARUBA GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes
Audio:    Card-1: Advanced Micro Devices [AMD] FCH Azalia Controller
          driver: snd_hda_intel bus-ID: 00:14.2 chip-ID: 1022:780d
          Card-2: Advanced Micro Devices [AMD/ATI] Trinity HDMI Audio Controller
          driver: snd_hda_intel bus-ID: 00:01.1 chip-ID: 1002:9902
          Sound: Advanced Linux Sound Architecture ver: k3.13.0-24-generic
Network:  Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
          driver: r8169 ver: 2.3LK-NAPI port: e000 bus-ID: 04:00.0 chip-ID: 10ec:8168
          IF: eth0 state: up speed: 100 Mbps duplex: full mac: 10:c3:7b:46:34:6f
Drives:    HDD Total Size: 2500.5GB (0.4% used)
          1: id: /dev/sda model: TOSHIBA_DT01ACA2 size: 2000.4GB serial: 44L4BTSKS
          2: USB id: /dev/sdb model: My_Passport_0837 size: 500.1GB serial: 57583131413535303843354A-0:0
Partition: ID: / size: 1.8T used: 9.8G (1%) fs: ext4 ID: swap-1 size: 12.02GB used: 0.00GB (0%) fs: swap
RAID:      System: supported: N/A
          No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
          Unused Devices: none
Sensors:  System Temperatures: cpu: 6.2C mobo: N/A gpu: 5.0
          Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 176 Uptime: 6:57 Memory: 985.8/11323.7MB Runlevel: 2 Gcc sys: 4.8.4
          Client: Shell (bash 4.3.11 running in lxterminal) inxi: 1.9.17

OK. Hope you know what all that means.  :-[

[rokytnji]

OK. Hope you know what all that means

Oh yes. Like a book. Its easy once you learn. I see you have about 12 gig of ram and are using about a gig of it. I see the 2 TB internal drive and the 500 gig passport hooked up.
CPU's are listed nicely and in detail. You are running a ATI card with the ati/radeon open source driver.

Nice rig like I said earlier. Even nicer now we know the exact specs you just gave.  See. Nice and easy spec: report. Took all of a second to get and about 2 minutes to decipher (easier when posted in code tags like this.

Code:

System:    Host: harry-Latitude-XT2 Kernel: 4.2.0-linuxlite i686 (32 bit gcc: 4.8.4)
           Desktop: Xfce 4.11.8 (Gtk 2.24.23) info: xfce4-panel dm: lightdm
           Distro: Ubuntu 14.04 trusty
Machine:   System: Dell product: Latitude XT2 Chassis: type: 8
           Mobo: Dell model: 0HJ48R Bios: Dell v: A01 date: 05/07/2009
CPU:       Dual core Intel Core2 Duo U9600 (-MCP-) cache: 3072 KB
           flags: (lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx) bmips: 6378
           clock speeds: min/max: 800/1601 MHz 1: 1200 MHz 2: 1200 MHz
Memory:    Array-1 capacity: 8 GB devices: 2 EC: None
           Device-1: DIMM_A size: 1 GB speed: 800 MHz type: DDR3 (Synchronous)
           bus width: 64 bits
           manufacturer: 80CE000080CE part: M378B2873CZ0-CF7 serial: N/A
           Device-2: DIMM_B size: 4 GB speed: 1333 MHz
           type: DDR3 (Synchronous) bus width: 64 bits
           manufacturer: N/A part: HMT351S6AFR8C-H9 serial: 112183E5
           Device-3: N/A size: N/A speed: N/A type: N/A
           bus width: N/A manufacturer: N/A part: N/A serial: N/A
           Device-4: N/A size: N/A speed: N/A type: N/A
           bus width: N/A manufacturer: N/A part: N/A serial: N/A
Graphics:  Card: Intel Mobile 4 Series Integrated Graphics Controller
           bus-ID: 00:02.0 chip-ID: 8086:2a42
           Display Server: X.org 1.15.1 drivers: intel (unloaded: fbdev,vesa)
           tty size: 80x24 Advanced Data: N/A for root
Audio:     Card Intel 82801I (ICH9 Family) HD Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:293e
           Sound: Advanced Linux Sound Architecture v: k4.2.0-linuxlite
Network:   Card-1: Intel 82567LM Gigabit Network Connection
           driver: e1000e v: 3.2.5-k port: efe0
           bus-ID: 00:19.0 chip-ID: 8086:10f5
           IF: eth0 state: down mac: <filter>
           Card-2: Intel WiFi Link 5100
           driver: iwlwifi bus-ID: 0c:00.0 chip-ID: 8086:4232
           IF: wlan0 state: up mac: <filter>
           WAN IP: <filter> IF: eth0 ip: N/A ip-v6: N/A
           IF: wlan0 ip: <filter> ip-v6: <filter>
Drives:    HDD Total Size: 180.0GB (29.4% used)
           ID-1: /dev/sda model: D2CSTK181M11 size: 180.0GB serial: OCZ-OQ3UU619XQCH1EJ6 temp: 30C
           Optical: No optical drives detected.
Partition: ID-1: / size: 8.6G used: 4.8G (60%) fs: ext4 dev: /dev/sda1
           label: N/A uuid: 99517a34-0f9f-42d4-af4c-82ae817fb057
           ID-2: /home size: 157G used: 45G (31%) fs: ext4 dev: /dev/sda2
           label: N/A uuid: 52dc4336-761c-4976-ac02-0851fa022abc
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: ID-1: /dev/ram0 size: 0.07G label: N/A uuid: N/A
           ID-2: /dev/ram1 size: 0.07G label: N/A uuid: N/A
           ID-3: /dev/ram2 size: 0.07G label: N/A uuid: N/A
           ID-4: /dev/ram3 size: 0.07G label: N/A uuid: N/A
           ID-5: /dev/ram4 size: 0.07G label: N/A uuid: N/A
           ID-6: /dev/ram5 size: 0.07G label: N/A uuid: N/A
           ID-7: /dev/ram6 size: 0.07G label: N/A uuid: N/A
           ID-8: /dev/ram7 size: 0.07G label: N/A uuid: N/A
           ID-9: /dev/ram8 size: 0.07G label: N/A uuid: N/A
           ID-10: /dev/ram9 size: 0.07G label: N/A uuid: N/A
           ID-11: /dev/ram10 size: 0.07G label: N/A uuid: N/A
           ID-12: /dev/ram11 size: 0.07G label: N/A uuid: N/A
           ID-13: /dev/ram12 size: 0.07G label: N/A uuid: N/A
           ID-14: /dev/ram13 size: 0.07G label: N/A uuid: N/A
           ID-15: /dev/ram14 size: 0.07G label: N/A uuid: N/A
           ID-16: /dev/ram15 size: 0.07G label: N/A uuid: N/A
Sensors:   System Temperatures: cpu: 53.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 180 Uptime: 58 min Memory: 639.9/5004.5MB
           Init: Upstart v: 1.12.1 runlevel: 2 default: 2 Gcc sys: 4.8.4
           Client: Shell (sudo running in bash) inxi: 2.2.28

Linux Lite 2.6

[Coastie]

Oh yes. Like a book. Its easy once you learn. I see you have about 12 gig of ram and are using about a gig of it. I see the 2 TB internal drive and the 500 gig passport hooked up.
CPU's are listed nicely and in detail. You are running a ATI card with the ati/radeon open source driver.

Nice rig like I said earlier. Even nicer now we know the exact specs you just gave.  See. Nice and easy spec: report. Took all of a second to get and about 2 minutes to decipher (easier when posted in code tags like this.

Thanks.