Swapping Hard Drives from Laptop to Laptop

[rokytnji]

Well, I got itchy. I recieved my Dell E5500 from fedex. A good friend gave it to me.
It had XP on a slow 5400 rpm 120 gig sata hard drive. On my Compaq CQ57. I had installed Linux Lite
on a GPT  Apple SSD drive.  Info on it coming presently.

Only fix I needed for the swap is this dell has broadcom wireless. I followed my own tutorial I posted at LQ last year on dealing with this.
I hooked up to my hard line and followed my instructions here.
http://www.linuxquestions.org/questions/...ess-35655/

Rebooted. Posting wirelessly here now on this

Code:

harry@biker1:~$ inxi -zv7
System:    Host: biker1 Kernel: 3.13.0-24-generic i686 (32 bit gcc: 4.8.2)
          Desktop: Xfce 4.11.6 (Gtk 2.24.23) info: xfce4-panel dm: lightdm Distro: Ubuntu 14.04 trusty
Machine:   System: Dell product: Latitude E5500 Chassis: type: 8
          Mobo: Dell model: 0DW635 Bios: Dell v: A17 date: 09/27/2011
CPU:       Dual core Intel Core2 Duo T7250 (-MCP-) cache: 2048 KB
          flags: (lm nx pae sse sse2 sse3 ssse3 vmx) bmips: 7973
          Clock Speeds: 1: 800 MHz 2: 800 MHz
Memory:    Using dmidecode: you must be root to run dmidecode
Graphics:  Card: Intel Mobile 4 Series Integrated Graphics Controller bus-ID: 00:02.0 chip-ID: 8086:2a42
          Display Server: X.Org 1.15.1 drivers: intel (unloaded: fbdev,vesa) Resolution: [email protected]
          GLX Renderer: Mesa DRI Mobile Intel GM45 Express x86/MMX/SSE2
          GLX Version: 2.1 Mesa 10.1.3 Direct Rendering: Yes
Audio:     Card Intel 82801I (ICH9 Family) HD Audio Controller
          driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:293e
          Sound: Advanced Linux Sound Architecture v: k3.13.0-24-generic
Network:   Card-1: Broadcom NetXtreme BCM5756ME Gigabit Ethernet PCI Express
          driver: tg3 v: 3.134 bus-ID: 09:00.0 chip-ID: 14e4:1674
          IF: eth1 state: down mac: <filter>
          Card-2: Broadcom BCM4312 802.11b/g LP-PHY driver: b43-pci-bridge bus-ID: 0c:00.0 chip-ID: 14e4:4315
          IF: wlan2 state: up mac: <filter>
          WAN IP: <filter> IF: eth1 ip: N/A ip-v6: N/A
          IF: wlan2 ip: <filter> ip-v6: <filter>
Drives:    HDD Total Size: 121.3GB (34.5% used)
          ID-1: /dev/sda model: APPLE_SSD_SM128 size: 121.3GB serial: DFKU604844ED440
          Optical: /dev/sr0 model: TSST CDRWDVD TS-L463A rev: D400 dev-links: cdrom
          Features: speed: 24x multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw state: running
Partition: ID-1: / size: 8.6G used: 4.3G (53%) fs: ext4 dev: /dev/sda1
          label: / uuid: 24580b54-b3d7-418a-96f2-6bbbf1ccccff
          ID-2: /home size: 103G used: 35G (36%) fs: ext3 dev: /dev/sda2
          label: /home uuid: 65f560b2-63b4-41e0-9d4e-4597d237493b
RAID:      System: supported: N/A
          No RAID devices: /proc/mdstat, md_mod kernel module present
          Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors:   System Temperatures: cpu: 40.5C mobo: N/A
          Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 159 Uptime: 22 min Memory: 457.9/1971.9MB
          Init: Upstart v: 1.12.1 runlevel: 2 default: 2 Gcc sys: 4.8.2
          Client: Shell (bash 4.3.111 running in x-terminal-emul) inxi: 2.2.1
harry@biker1:~$ xrandr
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 32767 x 32767
LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
  1280x800       60.0*+   40.0  
  1024x768       60.0  
  800x600        60.3     56.2  
  640x480        59.9  
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
TV1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
harry@biker1:~$ glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
302 frames in 5.0 seconds = 60.327 FPS
299 frames in 5.0 seconds = 59.631 FPS
299 frames in 5.0 seconds = 59.639 FPS
299 frames in 5.0 seconds = 59.624 FPS
299 frames in 5.0 seconds = 59.636 FPS

Like I said and will reiterate now. The only tweak/fix I needed was


sudo apt-get install firmware-b43-installer

After checking at
http://wireless.kernel.org/en/users/Drivers/b43
1st to make sure my chip was in the YES part of the column.







[table][tr][td]14e4:4315 [/td]

[td]yes [/td]

[td]BCM4312 [/td]
[/tr]
[/table]




[table][tr][td][/td]

[td][/td]

[td][/td]
[/tr]
[/table]
Using this to double check

Code:

$ lspci -vnn -d 14e4:
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5756ME Gigabit Ethernet PCI Express [14e4:1674]
    Subsystem: Dell Device [1028:0263]
    Flags: bus master, fast devsel, latency 0, IRQ 46
    Memory at f68f0000 (64-bit, non-prefetchable) [size=64K]
    Expansion ROM at <ignored> [disabled]
    Capabilities: <access denied>
    Kernel driver in use: tg3

0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
    Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c]
    Flags: bus master, fast devsel, latency 0, IRQ 17
    Memory at f69fc000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: b43-pci-bridge