+- Linux Lite Forums (https://www.freecinema2022.gq/forums)
+-- Forum: Software - Support (https://www.freecinema2022.gq/forums/forumdisplay.php?fid=5)
+--- Forum: Other (https://www.freecinema2022.gq/forums/forumdisplay.php?fid=20)
+--- Thread: Firmware error (/showthread.php?tid=3660)
Firmware error - Hoffer77 - 01-14-2017
Hello guys, its my second post.. well I got this lite linux but when I shut off computer and torn it on I get some firmware error, can someone help or send a link to where to start truble shooting.... any pogram that fix it, or have I ben using MS to long
Re: Firmware error - Hoffer77 - 01-14-2017
yeah, the old schoole methot, figure it out!
Re: Firmware error - bitsnpcs - 01-14-2017
what is the error code ?
Re: Firmware error - Hoffer77 - 01-15-2017
Hello there, it says somthing about: 18.4498869] b43-phy0 ERROR: FILE "B43/ucode15.FW
I'm not sure if that helps, I'm new to linus so it totaly don't give any meaning to me
Re: Firmware error - Valtam - 01-15-2017
Sometimes error messages will pop up from behind the boot splash. If your computer still boots and functions fine, there's no need to worry about it. Just ignore it.
Sent from my MI MAX using Tapatalk
Re: Firmware error - Hoffer77 - 01-15-2017
Ah ok then i'm fine, It just runs superb, Thanks
Re: Firmware error - Richard B - 01-16-2017
I realise that this is marked as solved but I have been struggling with a 2006 (Celeron M based) laptop with Broadcom BCM4311 wireless. No wireless with LL3.2 though worked with Vista. "Install drivers" seems to install proprietary Broadcom driver, but then I get not only no wireless but also no Ethernet! Also error messages on boot, the significant bit seeming to be
Code:
wl: module verification failed: signature and/or required key missing - tainting kernelSearching this forum and elsewhere indicates many similar problems with B43 series chips historically, though mine may be due to the repository not using an up-to-date checksum method (see Jerry's post https://www.freecinema2022.gq/forums/on-topic/repository-server-upgraded/msg27566/#msg27566)
Anyway, I've switched to using a mini-dongle (Ralink MT7601U based, under £12) which works fine and gives b/g/n wireless rather than just b/g for the built in chip.
Hope that helps someone.