+- Linux Lite Forums (https://www.freecinema2022.gq/forums)
+-- Forum: Hardware - Support (https://www.freecinema2022.gq/forums/forumdisplay.php?fid=6)
+--- Forum: Sound (https://www.freecinema2022.gq/forums/forumdisplay.php?fid=23)
+--- Thread: Bluetooth IOgear with i-sound headset (/showthread.php?tid=2751)
Bluetooth IOgear with i-sound headset - ihinkican - 03-07-2016
Hi
I am having an issue with bluetooth..device added successfully but failed to connect
installed linuxlite 2.6 x64 and updated
the bluetooth iogear gbu521w6 and the headset i-sound BT-2500
lsusb
Bus 002 Device 003: ID 0a5c:21e8 Broadcom Corp. BCM20702A0 Bluetooth 4.0
lsmod
bluetooth 391136 22 bnep,btusb,rfcomm
I found this post
https://www.freecinema2022.gq/forums/network/(solved)-enabling-full-bluetooth-support-in-linux-lite/
long short after reboot the computer never reached the desktop...
after reinstall and update I edited /etc/bluetooth/audio config as posted
[General]
Enable = Source,Sink,Headset,Gateway,Control,Media
Disable = Socket ...............added these two lines as did not see an enable item or any unhashed item similar.
HFP=false.....changed from default true to false
[A2DP]
SBCSources=1
MPEG12Sources=0 .......unhashed these three items
I skipped the update as already up to date and the bluemon, pavucontrol and pulse-audio-bluetooth appear to already be installed
When the first attemp failed I suspected as the post is from 2014 that the updates were already included and created a new problem
I added fw-0a5c_21e8.hcd to /lib/firmware and rebooted.....device added successfully but failed to connect
is the iogear no longer out of box goodness for linux?
is the i-sound headset not linux friendly? it works with all the other devices but I got it for this unit,
do I need a different firmware? where and how would I do that
do I actually need the ppa source added and to update blueman,pavucontrol and pulse-audio-bluetooth...doing so appears to be a problem
It was evidently a nice fix in july 2014 but does it still apply?
likely something simple but I am at a loss
Thanks for reading
Any thoughts?
Re: Bluetooth IOgear with i-sound headset - rokytnji - 03-08-2016
My thread to show 2016 relevance using Linux-Lite 2.8 up to date and running various kernels on different gear.
https://www.freecinema2022.gq/forums/network/skullcandy-soundmine-bluetooth-external-speaker/
Re: Bluetooth IOgear with i-sound headset - ihinkican - 03-08-2016
So..you like skull candy..no linuxlite bluetooth..blame kernal...solved move along...got it cheers
Re: Bluetooth IOgear with i-sound headset - Jocklad - 03-08-2016
https://www.freecinema2022.gq/forums/network/(solved)-enabling-full-bluetooth-support-in-linux-lite/
I used the above link for bluetooth headphones only yesterday on LL 2.8.
It works perfectly.
Also used it a couple of weeks ago on Ubuntu 14.04, just had to change from leafpad to gedit.
It works.
Jocklad
Re: Bluetooth IOgear with i-sound headset - ihinkican - 03-08-2016
Yes I understand, it works for you, However let me make it clear
it does NOT work on 2.6..for me.. due to 3.10 kernal ?...one would have to install lite 2.8 or update the kernal
my experiance was that 2,6 would not upgrade to 2.8 when clicking upgrade it said it would upgrade to 2.4 and thinking it was a typo I clicked anyway and it posted upgrade cancelled
my experiance with installing 2.8 was that after reboot the screen simply said no signal. thats it
after several attempts I was looking at the no signal.. thinking ..and bam the desktop loads...no splash..no code scrolling...wha
however due to bluetooth not working, blame the kernal to my understanding, giving 2.8 another go...same issue plus when attempting to update error cannot update package cache...is this normal?
QUESTION=So why no signal? solution? try open /etc/default/grub as root and remove "quiet splash" then sudo update-grub, reboot
Solution to update is to open the package manager and click reload. it will give error but list the problematic sources. click settings/repositories/other software scroll down and uncheck the problem sources then reload.
this should be successfull, then try favorites/update.
this should get you lite 2.8 with updates.. then
https://www.freecinema2022.gq/forums/network/(solved)-enabling-full-bluetooth-support-in-linux-lite/
now go to file system /etc/bluetooth / audio.conf and edit (as root) as per link instruction and save
[general]
Disable=Socket
Enable = Source,Sink,Headset,Gateway,Control,Media
HFP=false
[A2DP]
SBCSources=1
MPEG12Sources=0
Proceed to open terminal and add ppa and update blueman,pavucontrol and pulseaudio-module-bluetooth
Code: [Select]
sudo add-apt-repository ppa:cschramm/blueman
Code: [Select]
sudo apt-get update && sudo apt-get install blueman pavucontrol pulseaudio-module-bluetooth -y
as the iogear is broadcom you will need fw-0a5c_21e8.hcd. the link in the instruction link was not working for me but i was able to google an alternative copy and installed to /lib/firmware
the link appears to work now...naturally
after reboot was able to pair and then audio sync
the isound headset is working with the iogear adapter
a tad frustrating but the tip on 3.10 kernal gave me hope..
now I have to rebuild the system and see if it happens twice and not to confident with the no signal boot and failing sources BUT
If that is any help to anyone else
cheers
Re: Bluetooth IOgear with i-sound headset - Jocklad - 03-08-2016
[General]
Enable = Source,Sink,Headset,Gateway,Control,Media
Disable = Socket
HFP=false
[A2DP]
SBCSources=1
MPEG12Sources=0
Sorry just noticed this thread was marked Solved.
There is a space line from general to the next line enable on mine as above.Whether that will make any difference or not I dont know
Re: Bluetooth IOgear with i-sound headset - firenice03 - 03-08-2016
(03-08-2016, 09:24 PM)ihinkican link Wrote:my experiance was that 2,6 would not upgrade to 2.8 when clicking upgrade it said it would upgrade to 2.4 and thinking it was a typo I clicked anyway and it posted upgrade cancelled
my experiance with installing 2.8 was that after reboot the screen simply said no signal. thats it
after several attempts I was looking at the no signal.. thinking ..and bam the desktop loads...no splash..no code scrolling...wha
however due to bluetooth not working, blame the kernal to my understanding, giving 2.8 another go...same issue plus when attempting to update error cannot update package cache...is this normal?
Yes 2.6 can be upgraded to 2.8 - Any upgrade in the same series:
2.2 can go to 2.4 to 2.6 etc...
2.x cannot go to 3.0 this would be an install..
With that; 2.6 to 2.8 will not update the kernel... Either a clean install of 2.8 or upgrading kernel secondarily...
Also if you choose to 'upgrade' make use of Systemback - if 2.8 isn't suiting your needs, very easy to roll back to the restore point...
The unable to update the package, this could be due to "Google" ending chrome support for 32-bit Linux...
There are several threads how to correct this for 32 and 64-bit...
If its not google what is failing post which is...
using apt-get updates in the terminal will show all packages being loaded/updated...
Code:
sudo apt-get updateRe: Bluetooth IOgear with i-sound headset - ihinkican - 03-09-2016
update:
After installing 2.8 x64 and the process of the update then the bluetooth ritual a couple of times I have found the iogear usb adapter and Isound headset are working to my satisfaction. It appears to maintain the connection after a restart and cold boot, so far so good.
Thanks to responders