Linux Lite Forums
HP dv2000 remote control - Printable Version

+- Linux Lite Forums (https://www.freecinema2022.gq/forums)
+-- Forum: Hardware - Support (https://www.freecinema2022.gq/forums/forumdisplay.php?fid=6)
+--- Forum: Other (https://www.freecinema2022.gq/forums/forumdisplay.php?fid=28)
+--- Thread: HP dv2000 remote control (/showthread.php?tid=2697)



HP dv2000 remote control - GMO - 02-18-2016

Hello all, I'm new to linuxliteos but not to linux generally ,I have this crappy Hp pavilion with this remote controller and I couldn't set it up to work under windows,apparently Hp  loves to charge for support and none of drivers didn't work for me.
I was wondering is there a way to use it on linuxlite (tried lirc but there is no config file for this model of remote).


Re: HP dv2000 remote control - Valtam - 02-18-2016

Open a terminal, post the output of:

Code:
lspci

Code:
lsusb

and paste the results here using the [ code ] tags.


Re: HP dv2000 remote control - GMO - 02-19-2016

lspci
Code:
gmo@linuxlite:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation G72M [GeForce Go 7200] (rev a1)
05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
08:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 02)
08:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
08:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
08:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
08:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
lsusb
Code:
gmo@linuxlite:~$ lsusb
Bus 001 Device 003: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface [Broadcom BCM2045]
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 2188:0ae1 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub



Re: HP dv2000 remote control - Valtam - 02-19-2016

What's the exact make and model of your HP?


Re: HP dv2000 remote control - GMO - 02-19-2016

According to serial number (RN070EA#UUZ)it is HP Pavilion dv2115ea and year is 2006.
Thank you for the LinuxLiteOs , it was hard to find distro to work with my overheating crap. Wink


Re: HP dv2000 remote control - avj - 02-19-2016

I researched this machine a little and it appears the remote for it should be the: HP 435743-001 - HP mobile remote II Plus remote control

If that could be confirmed it would probably help.


Re: HP dv2000 remote control - GMO - 02-20-2016

Sorry for the delay, yes that's correct ,this is hp page with user guides http://support.hp.com/us-en/product/Remote-Controls/461648/model/1827587


Re: HP dv2000 remote control - Valtam - 02-21-2016

Try Benjamim Gois (bottom) answer here - http://askubuntu.com/questions/3780/how-to-make-hp-ir6-remote-control-work

Just ignore step 6.


Re: HP dv2000 remote control - GMO - 02-21-2016

Ok,I followed instructions and after reboot couldn't start lirc or gnome
irw
Code:
gmo@gmo-HP:~$ irw
connect: No such file or directory

gnome-lirc-properties
Code:
gmo@gmo-HP:~$ gnome-lirc-properties
Traceback (most recent call last):
  File "/usr/bin/gnome-lirc-properties", line 31, in <module>
    gnome_lirc_properties.run(sys.argv[1:], datadir)
  File "/usr/lib/pymodules/python2.7/gnome_lirc_properties/__init__.py", line 59, in run
    return ui.RemoteControlProperties(builder, datadir).run()
  File "/usr/lib/pymodules/python2.7/gnome_lirc_properties/ui/RemoteControlProperties.py", line 53, in __init__
    self.__setup_models()
  File "/usr/lib/pymodules/python2.7/gnome_lirc_properties/ui/RemoteControlProperties.py", line 80, in __setup_models
    self.__hardware_manager = hardware.HardwareManager(receivers_db)
  File "/usr/lib/pymodules/python2.7/gnome_lirc_properties/hardware.py", line 255, in __init__
    self.__hal = self.__bus.get_object(HAL_SERVICE, HAL_MANAGER_PATH)
  File "/usr/lib/python2.7/dist-packages/dbus/bus.py", line 241, in get_object
    follow_name_owner_changes=follow_name_owner_changes)
  File "/usr/lib/python2.7/dist-packages/dbus/proxies.py", line 248, in __init__
    self._named_service = conn.activate_name_owner(bus_name)
  File "/usr/lib/python2.7/dist-packages/dbus/bus.py", line 180, in activate_name_owner
    self.start_service_by_name(bus_name)
  File "/usr/lib/python2.7/dist-packages/dbus/bus.py", line 278, in start_service_by_name
    'su', (bus_name, flags)))
  File "/usr/lib/python2.7/dist-packages/dbus/connection.py", line 651, in call_blocking
    message, timeout)
dbus.exceptions.DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Hal was not provided by any .service files

I quit , sorry for waisting your time.