+- Linux Lite Forums (https://www.freecinema2022.gq/forums)
+-- Forum: Software - Support (https://www.freecinema2022.gq/forums/forumdisplay.php?fid=5)
+--- Forum: Installing Linux Lite (https://www.freecinema2022.gq/forums/forumdisplay.php?fid=17)
+--- Thread: now get partial black screen after log on and welcome screen Recently upgraded (/showthread.php?tid=2185)
now get partial black screen after log on and welcome screen Recently upgraded - newtusmaximus - 09-11-2015
HP DC7700 Ultra Slim factor Desktop
model name : Intel® Core™2 CPU 6300 @ 1.86GHz
model name : Intel® Core™2 CPU 6300 @ 1.86GHz
Architecture: i686
CPU op-mode(s): 32-bit, 64-bit
*-display
description: VGA compatible controller
product: 82Q963/Q965 Integrated Graphics Controller
vendor: Intel Corporation
Updated to LL2.6 from 2.4 via menu/settings/ Lite Upgrade.
Initially no issues on boot start up
Recently now get partial black screen after log on and welcome screen. Get xcfe bar at the bottom, but rest black – i.e no background picture and no icons.
http://i.imgur.com/AEFzFHk.png
Otherwise all working OK I.e browser, mail etc.
Home folder / linux desktop shows that folders within the desktop are still there and can be activated etc.
Actions taken.
Menu/settings/Display – all appears OK – Monitor still identified and correct resolution.
Menu/settings/appearance seems OK @ MediterraneanWhite
Screensaver set to blank screen only – unchanged - not locked
Power manager – On AC PC activate after 17 min idle. Monitor = sleep after 7 minutes and power down after 17 minutes inactivity.
No other programs added since upgrade to 2.6
Any ideas. Tks
Re: now get partial black screen after log on and welcome screen Recently upgraded - rokytnji - 09-11-2015
Not sure where your upgrade to 2.6 went wrong. Just posting to provide info.
I upgraded this unit to 2.6 yesterday and upgraded kernel also to 4.2.
Noticed during the upgrade process that it starts out making backups first of files in /home and /etc/skel.
Just posting this to give other members who may have a idea on what you need to restore from those backups.
Re: now get partial black screen after log on and welcome screen Recently upgraded - newtusmaximus - 09-11-2015
Thanks. For the first few days after the upgrade and subsequent updates, everything appeared as normal. It is only in the last few days that the problem has occurred. It is of nuisance value more than critical..
Re: now get partial black screen after log on and welcome screen Recently upgraded - paul1149 - 09-21-2015
Hi,
I had a somewhat similar problem due to a corrupt browser install, and again when I renamed a thumb drive without unmounting it first (which is SOP in Windows...). I had a total black screen regarding wallpaper and icons, but all elements lit up when I opened, such as the Menu and all programs.
I found this solution for ubuntu which worked famously.
Open a terminal and simply run following command and then log out:
[b] rm -rf ~/.cache/sessions
Re: now get partial black screen after log on and welcome screen Recently upgraded - newtusmaximus - 09-26-2015
Tks Paul.
Tried your suggestion. Cut & pasted into terminal; return key and then terminal went staright back to " linuxlite@linuxlite-HP-Compaq-dc7700p-Ultra-slim-Desktop:~$
It did not ask me for password.
I then logged out and logged back on again. Problem still the same
I then shut down , waited and then booted up again. No change.
A nuisance more than a problem. Have run updates etc regularly since the original manifestation and no change
Loathe to back up now as problem would still be there on restoring. So will have to live with it until version 2.8 perhaps or even the "Bite The Bullet" version 3.0
Re: now get partial black screen after log on and welcome screen Recently upgraded - paul1149 - 09-26-2015
Ok, sorry that didn't work. Must have a different root than my problem had. Perhaps switching resolution temporarily would jog something? Just stabbing at it, I'm new at this myself.
[SOLVED] Partial black screen after log on and welcome Recently upgraded - newtusmaximus - 10-01-2015
SOLVED?
I think I have found an answer to my particular problem but still not sure what triggered the problem in the first place.
From posts elsewhere concerning blank screens on laptops after suspent etc - Light Locker was discussed .
My issue was slightly different , i.e desktop with CRT monitor.
I had previously explored the Desktop display settings options to see whether they had any effect - no change. i.e changing backround from blank to backround picture etc.
After the upgrade to 2.6 from 2.4, I had adjusted the Power Manager setting for monitor staged shut down, and I had recently added the pc suspend to the schedule. This seemed to be working OK without problems, but before the problem posted.
So I checked setting in Light Locker and found for some reason ( my action? Can't be sure) that “enable Light Locker slide button was set to on. So disabled this and restarted - Problem persisted.
So with the light locker still unchanged to off went to Application Autostart and unclicked liight locker and then restarted.
Also went back into Application Autostart and Light Locker was no longer present as an added option - i.e it had been removed from the list of active start ups.
Success!! Normal service resumed – Desktop display = Black screen but with ICONS - menu bar as before on bottom if screen. The latter had always been present during the problem and functioned normally.
Not sure if this will be of help to others -
